Skip to main content
Skip table of contents

Differences between the Genius Smart Plug

Overview

This is both a switching device and a signal boosting device. It can be used in place of the Electric Relay (which is a tamperproof alternative, but requires electrical wiring during installation).

The Smart Plug is installed by being inserted into a standard 3-pin plug socket.

Each Genius Hub system uses a number of signal boosting devices, such as the Smart Plugs to make the system work reliably, and increasing the life of the battery powered devices by providing easy lines of communication back to the Genius Hub.

Versions of the Genius Smart Plug


PH-PLG-C

PH-PLG-D

PH-PLG-E

Installation

UK standard 3-pin plug socket.

UK standard 3-pin plug socket.

UK standard 3-pin plug socket.

Repeater compatibility

All devices, apart from latest Genius Radiator Valve (DA-WRV-E) and Communications Adaptor (EL-UZD-A)

All devices, apart from latest Genius Radiator Valve (DA-WRV-E) and Communications Adaptor (EL-UZD-A)

All devices.

Communications ProtocolZ-WaveZ-WaveZ-Wave & Zigbee
InteractionAnyone can press the button on the front to trigger a timed overrideAnyone can press the button on the front to trigger a timed overrideAnyone can press the button on the front to trigger a timed override
Plug Locking CoverNOT compatibleCompatibleCompatible

Further Information


JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.